List of available Sensofar Case studies and Application notes categorized into industries and markets.

The purpose of this case study is to measure the cutting-edge radius of an insert with a 3D optical profiler and also extract the roughness parameters along the edge of the cutting tool.

In this study, a non-contact 3D surface metrology confocal microscopy is used for the measurement of ceramic layers to measure heights, and volumes of single-layer ceramic paths, and heights of [...]

The aim of this research was to investigate the impact of the insertion procedure on the surface topography of dental implants. To achieve this, it is necessary to evaluate if the surgical [...]

The purpose of this study is to characterize the ablation craters associated to Laser-Induced Breakdown Spectroscopy (LIBS) measurements on a fresco sample and to compare the craters on a 2-cent [...]

In this study, we demonstrate a novel laser surface texturing method based on a cost-effective sub-nanosecond (ns) near-infrared (NIR) fiber laser source. This laser-based method shows friction [...]

We are using Confocal microscopy for knowing how, when, and where cereals were domesticated in the Near East 11,000 years ago, and how herbivores were managed during Late Prehistory and Early [...]

The 3D optical profilometer S neox allowed machining specialists to identify the tool responsible for the defect and to follow its wear during serial production, thus controlling the [...]

We study the optical properties of QDs that are embedded in PhC cavities, leading to enhanced emission (the Purcell effect), or in WGs, producing photon multiplexing devices.

The study is based on the optical properties of QDs that are embedded in PhC cavities, leading to enhanced emission (the Purcell effect), or in WGs, producing photon multiplexing devices.

The task of this work was to build large-scale organic light-emitting diodes (OLEDs) for luminaires. This required an invisible series connection of OLEDs to reduce the device current and hence [...]

In the fabrication of nano pressure sensors for biological applications, the sacrificial layer etching and the sealing of the two membranes separated by a vacuum gap to form a Fabry–Pérot [...]

We will perform the characterization of microchannels in this study.